Here is the full log if it helps.

% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1585 100 1585 0 0 68913 0 --:--:-- --:--:-- --:--:-- 68913
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 418 100 418 0 0 3834 0 --:--:-- --:--:-- --:--:-- 3834
Traceback (most recent call last):
File "/snap/docker/471/bin/docker-compose", line 11, in <module>
load_entry_point('docker-compose==1.25.5', 'console_scripts', 'docker-compose')()
File "/snap/docker/471/lib/python3.5/site-packages/compose/cli/main.py", line 72, in main
command()
File "/snap/docker/471/lib/python3.5/site-packages/compose/cli/main.py", line 125, in perform_command
project = project_from_options('.', options)
File "/snap/docker/471/lib/python3.5/site-packages/compose/cli/command.py", line 47, in project_from_options
environment = Environment.from_env_file(override_dir or project_dir, environment_file)
File "/snap/docker/471/lib/python3.5/site-packages/compose/config/environment.py", line 77, in from_env_file
instance = _initialize()
File "/snap/docker/471/lib/python3.5/site-packages/compose/config/environment.py", line 72, in _initialize
return cls(env_vars_from_file(env_file_path))
File "/snap/docker/471/lib/python3.5/site-packages/compose/config/environment.py", line 43, in env_vars_from_file
with contextlib.closing(codecs.open(filename, 'r', 'utf-8-sig')) as fileobj:
File "/snap/docker/471/usr/lib/python3.5/codecs.py", line 895, in open
file = builtins.open(filename, mode, buffering)
PermissionError: [Errno 13] Permission denied: './.env'

Yep, I wasn't assigning the values correctly for the service. All fixed!

For anyone interested I got this running by one installing docker-compose from the actual docker tutorial on how to do it, and then giving docker permission to run commands as root. There is a tutorial on how to do it on. On top of those I moved it to a server with 2gb of ram, as I noticed a few out of memory errors when it was trying to start up.
https://docs.docker.com/engine/install/linux-postinstall/

@dan

@dan said in Problems logging in user through C# API call:

e

The ultimate help ended up being this
https://github.com/FusionAuth/fusionauth-netcore-client/blob/master/fusionauth-netcore-client-test/fusionauth-netcore-client-test/test/io/fusionauth/FusionAuthClientTest.cs
which went over each functionality which was nice. Otherwise comments of functions on the API would be nice as at points it is a bit unclear. Honestly this was the only problem I have faced so far(and it was just my fault in the end), and it has been an amazing tool.

@dan

@dan said in Problems logging in user through C# API call:

e

The ultimate help ended up being this
https://github.com/FusionAuth/fusionauth-netcore-client/blob/master/fusionauth-netcore-client-test/fusionauth-netcore-client-test/test/io/fusionauth/FusionAuthClientTest.cs
which went over each functionality which was nice. Otherwise comments of functions on the API would be nice as at points it is a bit unclear. Honestly this was the only problem I have faced so far(and it was just my fault in the end), and it has been an amazing tool.

Yep, I wasn't assigning the values correctly for the service. All fixed!

I got it working in a separate console app, so must be something in my app.

A new update. I can do a get user by email, but if I try to do user login both sync and async it throws a 404 status code. So clearly it is finding the server, maybe it just can't find the login portal?

Any suggestions on how to proceed, or is this a bug I should report?

Though it looks like I have two applications, a base FusionAuth and then my applications, both using the same localhost:9011. How does it seperate them out? And if I need to change that where do I do that?

This is where I build the FusionAuth Client.

public static FusionAuthClient FusionAuth;
public static FusionAuthClient Build(IConfiguration configuration)
{
    if (FusionAuth == null)
        FusionAuth = new FusionAuthClient(
            apiKey:configuration.GetConnectionString(FusionAuthMgmtServerInfo.ApiKey),
            host:configuration.GetConnectionString(FusionAuthMgmtServerInfo.FusionauthUrl),
            tenantId:configuration.GetConnectionString(FusionAuthMgmtServerInfo.TenantId));
    return FusionAuth;
}

which just are the ""UsersManagement:ApiKey", "UserManagement:Server", "UserManagement:ClientID"

EDIT:
Also in the webportal admin page for the application my "Authorized redirect URLs" is "http://xxx.xxx.xxx.xxx:5000/signin-oidc"(with the xxx being the servers public static ipv4), and "LogoutURL" as "http://xxx.xxx.xxx.xxx:5000"

If I look at the application details it shows.

OAuth IdP login URL:	 http://localhost:9011/oauth2/authorize?client_id=[CLIENTID]&response_type=code&redirect_uri=http%3A%2F%2F[SERVERIpv4]%3A5000%2Fsignin-oidc
Logout URL:	         http://localhost:9011/oauth2/logout?client_id=[CLIENTID]
Introspect endpoint:	 http://localhost:9011/oauth2/introspect
Token endpoint:	         http://localhost:9011/oauth2/token
Userinfo endpoint:	 http://localhost:9011/oauth2/userinfo
Device endpoint:	 http://localhost:9011/oauth2/device_authorize
OpenID Connect Discovery:http://localhost:9011/.well-known/openid-configuration/[TENANT_ID]
JSON Web Key (JWK) Set:	 http://localhost:9011/.well-known/jwks.json

with [] being what they should be(excluded by me).

@dan said in Problems logging in user through C# API call:

_faClient

So _faClient is DIed. The service is setup here.

services.AddTransient<IFusionAuthAsyncClient, FusionAuthClient>(_ =>
{
    return FusionAuthClientBuilder.Build(context.Configuration);
});

How do I check to see if the server has started? I have the firewall open on that port(in and out), and can login through the 9011 port.
This is setup on a ec2 server, so I am using a static ip to make calls to it, and I have those specified in my User secrets, which looks like.

{
  "UsersManagement":{
    "ClientSecret" : "XXXX",
    "ApiKey" : 	"XXXX",
    "Server" : "http://xxx.xxx.xxx.xxx:9011",
    "Authority" : "http://SAME.AS.ABOVE:9011",
    "TenantId" : "XXXX",
    "ApplicationId" : "XXXX",
    "ClientID" : "SAME AS ABOVE"  }
}

Which looking at the example project you linked they have

"SampleApp" : { 
      "Authority" : "http://localhost:9011",
      "CookieName" : "sampleappcookie",
      "ClientId" : "4420013f-bc5e-4d5a-9f94-f4b64ad5107c"
   }

Does the json object have to be the name of the project, assembly, or namespace?
EDIT: Ah nevermind they are specifying it in the AddOpenIdConnect, where instead I am using the Client Object.

I fallowed this tutorial
https://fusionauth.io/blog/2020/05/06/securing-asp-netcore-razor-pages-app-with-oauth/
should I see something when I do "http://localhost:5000", currently it just gets a "localhost refused to connect."?

Hi.

I am trying to make a login for my BlazorServer app, but I am having a problem of the webbrowser throwing the bellow error.

System.ArgumentNullException: Value cannot be null. (Parameter 'uriString')
   at System.Uri..ctor(String uriString)
   at io.fusionauth.DefaultRESTClient..ctor(String host)
   at io.fusionauth.DefaultRESTClientBuilder.build(String host)
   at io.fusionauth.FusionAuthClient.buildAnonymousClient()
   at io.fusionauth.FusionAuthClient.buildClient()
   at io.fusionauth.FusionAuthClient.LoginAsync(LoginRequest request)
   at Roots.FusionAuth.Users.FusionAuthUserManager.Login(String email, String password) in D:\Projects\GenoTech\Roots\Roots.FusionAuth\Levels\

I can't find what field I am not setting, but for reference here is my login code.

var loginRequest = new LoginRequest();
            
Guid appID = new Guid();
string? stringID = FusionAuthMgmtServerInfo.ApplicationId;
if (Guid.TryParse(stringID, out appID)) { }
else
    _log.LogError("Couldn't convert Application Id, string to Guid.");
            
loginRequest.applicationId = appID;
loginRequest.password = password;

loginRequest.ipAddress = FusionAuthMgmtServerInfo.FusionauthUrl;

Task<ClientResponse<LoginResponse>> loginTask;
await (loginTask = _faClient.LoginAsync(loginRequest));

var loginResponse = loginTask.Result;

I was thinking it was the .ipAddress but since the library has no commenting I have been shooting in the dark most of the time with all this.