Identity Provider with no email?
-
I added the following lambda, but I'm quite confident that the lambda function never runs.
// Using the response from Facebook Me API, reconcile the User and User Registration. function reconcile(user, registration, facebookUser) { user.firstName = facebookUser.first_name; user.middleName = facebookUser.middle_name; user.lastName = facebookUser.last_name; user.fullName = facebookUser.name; if (facebookUser.picture && !facebookUser.picture.data.is_silhouette) { user.imageUrl = facebookUser.picture.data.url; } if (facebookUser.birthday) { // Convert MM/dd/yyyy -> YYYY-MM-DD var parts = facebookUser.birthday.split('/'); user.birthDate = parts[2] + '-' + parts[0] + '-' + parts[1]; } if (!facebookUser.email) { user.email = facebookUser.sub + '@no-email.twoseven.xyz'; console.info('Added missing email: \n' + JSON.stringify(facebookUser)); } }
Whenever I perform a login with a Facebook account that has no email registered, I see the following in the event log:
... 8/28/2020 05:05:45 AM EDT Call the [https://graph.facebook.com/oauth/access_token] endpoint. 8/28/2020 05:05:45 AM EDT Endpoint returned status code [200] 8/28/2020 05:05:45 AM EDT The identity provider was unable to reconcile the email address. An email address is required to complete this request.
-
The work around described above only works for OpenID Connect based IdPs, it will not work for Facebook. If the Facebook user is not providing you their email, they will not be able to login.
-
From my (layman's) standpoint, that feels a bit arbitrary
Is a Facebook login different from OIDC? Is there a good reason as to why FusionAuth is preventing these users from being able to login? -
Perhaps arbitrary. It is sort of a hack to allow some specific OIDC IdPs to work.
In the case of Facebook, the reason for an email address being omitted from the response is easier to discern in FusionAuth. When you configure a Facebook IdP, you are inherently asking FusionAuth to defer authentication to Facebook.
The Facebook user can optionally decide to not share their email with FusionAuth. I am assuming this is the case since you are not getting an email back from Facebook.
In this scenario, we fail the login because the user has chosen not to share their email address.
So this is the reason why we don't allow the user to login.
The longer term solution to this is coming - where FusionAuth will take a unique Id from Google, Facebook, Twitter etc - and record their unique Id instead of just relying upon the email address. This will allow us to recognize the user uniquely apart from their email address. This will likely also allow FusionAuth to reconcile the user and possibly make the email address optional when creating the user.
-
Is 'login with Apple' working right now? I get the above mentioned error with different accounts. I followed the instruction here - maybe it's a bit out of date?
I don't get asked by Apple whether I want to give my real or fake email, so FusionAuth must not be asking for it?
Apple dev doc says:
To request user information in the
id_token
(assuming you are requesting via the/auth/authorize
REST API), you’ll need to include thescope
query parameter, which supports the values—name
andemail
. You can request one, both, or none.
Note: Use space separation and percent-encoding for multiple scopes; for example,“scope=name%20email”
....
If you request the user’s verified email address, Sign in with Apple prompts the user for it, to share with your app. The user may choose to share their real email address or an anonymous one that uses the private email relay service. In both cases, Apple verifies that the email address works and is ready for use.
Thanks!
-
I am using
name email
as it shows in the documentation and I can log in. You can enabledebug
on the Apple Identity Provider which may provide you some additional details if it is not working. -
Checked again. Here's the screenshot:
Apple authentication is done, back to FusionAuth, and still
An email address was not provided for the user. This account cannot be used to login, unable to complete this login request.
I can't really debug inside Docker - the Portainer->log only shows an irrelevant error that happened ages ago:
`
26-Sep-2020 13:55:07.670 INFO [http-nio-9011-exec-2] org.apache.tomcat.util.http.Parameters.processParameters Invalid chunk starting at byte [172] and ending at byte [173] with a value of [=] ignoredNote: further occurrences of Parameter errors will be logged at DEBUG level.
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by org.apache.ibatis.reflection.Reflector (file:/usr/local/fusionauth/fusionauth-app/web/WEB-INF/lib/mybatis-3.4.6.jar) to field java.util.UUID.serialVersionUID
WARNING: Please consider reporting this to the maintainers of org.apache.ibatis.reflection.Reflector
WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
WARNING: All illegal access operations will be denied in a future release`
-
Hiya,
Can you please check the
debug
setting (below 'reconcile lambda') and run through the login sequence again? It'd be great to see if that provides more details. -
@dan here's the message:
An email address was not provided for the user. This account cannot be used to log in, unable to complete this login request.
debug
is enabled, but I have no idea where to look for logs - under docker the log that is seen in e.g. Portanier is only showing some older warnings:WARNING: Please consider reporting this to the maintainers of org.apache.ibatis.reflection.Reflector WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations WARNING: All illegal access operations will be denied in a future release
Another interesting thing: of two of my friends who tried it, one was able to log in, and Apple even asked him if he wanted to hide his real email address. The other one got the same message that I'm getting.
-
Hiya,
Hmmm. That's not super helpful, eh? The ibatis errors shouldn't be related (see https://github.com/FusionAuth/fusionauth-issues/issues/721 for more about that particular warning).
Just to check, the screenshot you shared had
debug
disabled, but you definitely enabled it?Are you seeing anything in the event log (in the admin UI) that might shed more light on the situation?
Does the email address you are using to try to login with have any special characteristics?
-
I played with it more and found this:
-
Login with Apple sometimes works, sometimes doesn't. It looks like users with emails that are not known to my FusionAuth are fine. But existing emails are not.
-
When a new user is successfully registered via Google or Twitter (didn't try other providers) all there fields are returned by /oauth2/userinfo: 'given_name', 'family_name', and 'name'. And consequently the FusionAuth database has all three: 'firstName', 'lastName', and 'fullName'.
However, when a new user is onboarded via the Apple plugin, the user is missing 'name' as returned by /oauth2/userinfo, and 'FullName' is also missing from the database.
-
-
The results of the
Userinfo
endpoint will reflect what is in the JWT and what additional details FusionAuth knows about the user.So with Twitter, Facebook, Google and Apple, this will all depend upon what is returned from those providers, and then subsequently what you do with that information during login.
Each of these IdPs can be assigned a Reconcile Lambda, a default lambda is provided with FusionAuth that you can use and modify.
https://fusionauth.io/docs/v1/tech/lambdas/apple-reconcile/
https://fusionauth.io/docs/v1/tech/lambdas/facebook-reconcile/
https://fusionauth.io/docs/v1/tech/lambdas/google-reconcile/
https://fusionauth.io/docs/v1/tech/lambdas/twitter-reconcile/In your example, are you using an Apple Reconcile Lambda, and if so, can you post your lambda function?
Apple will only return the user's first and last name on the very first authentication event. Subsequent events will not contain this information, so if you were to log a user in using the Apple provider, and then subsequently assign a reconcile Lambda that would otherwise attempt to capture this information, you will not have that User's first and last name in FusionAuth.
Similarly with Twitter, we would need to see your reconcile Lambda function body that you have assigned to this IdP configuration to understand what is being obtained from Twitter and stored in FusionAuth.
Hope that helps!
-
Can we just skip the login part and just return the
userInfo
? -
@robotdan said in Identity Provider with no email?:
Each of these IdPs can be assigned a Reconcile Lambda, a default lambda is provided with FusionAuth that you can use and modify.
I'm using the default lambda. And it does NOT return "name/fullname" as I mentioned earlier. Google and Twitter do return "name/fullname".
Here's how Apple Identity provider is set up:
-
What is the lambda seeing? Can you have the entire JSON object printed to the log and share that?
-
Important
Apple only returns the user object the first time the user authorizes the app. Persist this information from your app; subsequent authorization requests won’t contain the user object.
(https://developer.apple.com/documentation/sign_in_with_apple/sign_in_with_apple_js/configuring_your_webpage_for_sign_in_with_apple)So you should go to Settings->ID Apple ->Password&Security and remove the app from apps that use your Apple ID
Now you can register again and apple will send the userInfo.
-
@robotdan Is the workaround for no email Identity Providers available in SAML as well?
-
@joseantonio Nope, only for OIDC. Feel free to file an issue explaining your use case or open a support ticket if you have a support plan.
-
I was incorrect. I've learned that you should be able to do this with a SAML Lambda. Here's the documentation for the SAML lambda you should customize: https://fusionauth.io/docs/v1/tech/lambdas/samlv2-response-populate/ Sorry about that.
Please let us know how this goes.
-
This post is deleted!